Aliquots, withdrawal and mixing
12 min
Skills you'll build3 skills
- Calculate the amount of solute in an aliquot
- Predict the concentration after withdrawing a well-mixed aliquot
- Mix a dilution before transferring the next aliquot
At the bench: Prepare a dilution using the required sample and diluent volumes
Try first
Get the idea
Amount from concentration
A concentration is an amount per volume, so an amount is a concentration multiplied by a volume:
amount = concentration × volume
The volume has to be in the unit the concentration is written per. A concentration in mg/L needs the volume in liters: 2,000 µL is 0.002 L, and at 150 mg/L it contains 150 × 0.002 = 0.3 mg.1 Multiplying 150 by 2,000 without converting the volume gives 300,000, a result a million times too large.
Aliquots and withdrawal
A solution is uniform throughout, so every part of it has the same composition as the whole.1 For aliquots and withdrawals, this means:
- An aliquot, a measured portion taken from a well-mixed tube, has the same concentration as the tube. Its smaller volume contains proportionally less of the substance.
- Adding diluent lowers a concentration because it adds volume without adding substance.1
- Withdrawal takes volume and substance out together. Taking 300 µL out of 1,200 µL removes a quarter of the volume and a quarter of the substance, so the 900 µL left in the tube has the same concentration as before. Withdrawing liquid for the next tube does not dilute the tube, so its step factor stays the same.
Keep two volumes apart in your records:
| Volume | What it sets |
|---|---|
| Prepared, when the tube was made | The tube's factor |
| Remaining, after withdrawals | How much is left to use |
Mix before you draw
These rules apply only to a well-mixed tube. Right after a transfer, the added solution and the diluent have not yet blended, and liquid at the pipette tip can be stronger or weaker than the tube as a whole.1 An aliquot drawn before mixing has an unknown concentration, so every tube made from it has an unknown concentration too, and the calculated factors no longer match the tubes.
Each step follows the same order:
- Mix the source.
- Transfer.
- Mix the new tube completely.
- Draw the next aliquot from it.
Follow the bench demonstration
Sources for this step
References
- Flowers P, Theopold K, Langley R, Robinson WR. Molarity. In: Chemistry 2e. OpenStax; 2019. Accessed September 23, 2026. https://openstax.org/books/chemistry-2e/pages/3-3-molarity
Watch one
A well-mixed tube holds 2,000 µL of a solution at 60 mg/L. You withdraw 800 µL for the next step. What is the concentration of the 1,200 µL left in the tube?
- Convert: 2,000 µL = 0.002 L, 800 µL = 0.0008 L and 1,200 µL = 0.0012 L.
The concentration is written per liter, so the volumes must be in liters too.
- Amount in the tube: 60 mg/L × 0.002 L = 0.12 mg, which is 120 µg.
Knowing the amount in the whole tube shows what the withdrawal takes away.
- Amount withdrawn: 60 mg/L × 0.0008 L = 0.048 mg, which is 48 µg.
A portion of a mixed solution contains the same share of the substance as of the volume.
- What stays is 120 − 48 = 72 µg in 0.0012 L, and 0.072 mg ÷ 0.0012 L = 60 mg/L.
The new concentration is the remaining amount divided by the remaining volume.
Your turn
Use it
Optional for this step.
Review missed questions
For reference
Sources checked
The rest of this step has a short briefing, a demonstration at the bench, 3 practice problems and a case in the lab.
Free account: keep your progress and get review reminders. Have one? Sign in