Protection, exposures, spills and fire
15 min
Skills you'll build4 skills
- Choose PPE and handling controls for a task's splash, sharps, or aerosol risk
- Choose the immediate response to a blood or body-fluid exposure
- Use the SDS and hazard label to choose chemical handling and spill precautions
- Choose the required response to a fire or equipment emergency
At the bench: Choose protective equipment for the work at hand · Respond to an exposure, spill, or fire using the local procedure
Try first
Get the idea
The person at the bench usually makes safety decisions quickly. Start with how the hazard could reach you or someone nearby.
Protection
Under universal precautions, all blood and other potentially infectious material is handled as infectious, because a label or history cannot show which specimen carries a bloodborne pathogen.1 Protection is chosen for the route of exposure in each task:
| When the task | Protection |
|---|---|
| Could send splashes, spray or droplets to the eyes, nose or mouth | A mask with goggles or a face shield, and work done in a way that keeps splashing and droplets to a minimum1 |
| Uses sharps | Safety devices and puncture-resistant containers2 |
| Makes infectious aerosols, such as vortexing or opening cultures | A certified biological safety cabinet, with sealed centrifuge cups opened inside containment2 |
After an exposure
After a needlestick or a splash of blood onto skin or a mucous membrane:1
- First aid at once. Wash skin with soap and water, or flush the eye, nose or mouth with water.
- Report immediately through the facility's urgent pathway.
Report without delay. The employer must then offer a confidential medical evaluation, and source testing and any prophylaxis decision are time-sensitive.1 Waiting until the end of the shift delays them.
Chemicals and spills
The hazard label and the safety data sheet (SDS) describe a chemical's hazards and how to handle, store and clean it up. SDSs must be available to workers on every shift.3
- A small spill of a known chemical, within the worker's training, is cleaned up with the specified PPE and the spill kit.4,7
- A spill of unknown identity, a large one, one giving off toxic vapor or one reacting violently is isolated. The emergency plan and its trained responders take over.4,7
Fire on equipment
A fire on energized electrical equipment is a Class C fire. It requires an electrically nonconductive agent, such as carbon dioxide or a dry chemical rated for Class C.5 Water conducts current and can shock the user.
A portable extinguisher is used only when all of these conditions are met:5,6
- the user is trained
- the fire is in its earliest stage
- there is a clear exit behind the user
When any of those is missing, raise the alarm and follow the evacuation plan.5,6
Follow the bench demonstration
Sources for this step
References
- Occupational Safety and Health Administration. 29 CFR 1910.1030: Bloodborne pathogens. Accessed September 23, 2026.
- Centers for Disease Control and Prevention, National Institutes of Health. Biosafety in Microbiological and Biomedical Laboratories. 6th ed. US Department of Health and Human Services; 2020. Accessed September 23, 2026. https://www.cdc.gov/labs/bmbl/index.html
- Occupational Safety and Health Administration. 29 CFR 1910.1200: Hazard Communication. Accessed September 23, 2026.
- Occupational Safety and Health Administration. 29 CFR 1910.1450: Occupational exposure to hazardous chemicals in laboratories. Accessed September 23, 2026.
- Electronic Code of Federal Regulations. 29 CFR §1910.155: Scope, application and definitions applicable to this subpart. Accessed September 23, 2026.
- Occupational Safety and Health Administration. 29 CFR 1910.157: Portable fire extinguishers. Accessed September 23, 2026.
- Electronic Code of Federal Regulations. 29 CFR §1910.120: Hazardous waste operations and emergency response. Accessed September 23, 2026.
Watch one
A centrifuge spinning capped blood tubes stops, and through the lid you see that one tube has broken inside its sealed safety cup. How do you handle it?
- Leave the lid closed and let aerosols settle for the time your procedure sets.
Opening at once can release aerosol from the broken tube into the room.
- Put on gloves, a fluid-resistant coat and eye and face protection.
The broken tube is a splash, sharps and aerosol risk together.
- Carry the sealed cup to a biological safety cabinet and open it there.
The sealed cup still contains the aerosol, and opening it inside containment keeps the aerosol out of the room.
- Pick up the glass with forceps or tongs and drop it into a sharps container.
Broken glass cuts through gloves.
- Disinfect the cup and the cabinet surface with an EPA-registered disinfectant as labeled, then report the incident.
A disinfectant works only at its labeled strength and wet contact time.
Your turn
Use it
Optional for this step.
- Late in an evening shift, a phlebotomist hands you a used needle on a holder with its safety feature not engaged.
- As you take it, the needle slips and punctures your glove and fingertip.
- Two hours of work remain, and the bench is backed up.
- The phlebotomist asks whether they should recap the next needle before passing it over.
The injury came from a used needle passed by hand with its safety feature not engaged.
- For this injury, wash the site and report it immediately so the evaluation starts on time.
- To prevent the next one, engage the safety feature and discard the needle at the draw site.
Review missed questions
For reference
Sources checked
The rest of this step has a short briefing, a demonstration at the bench, 3 practice problems and a short case.
Free account: keep your progress and get review reminders. Have one? Sign in