Making up solutions
15 min
Skills you'll build4 skills
- Calculate molarity or reagent mass using the solute molar mass
- Calculate normality for the stated reaction
- Calculate a percent solution on its stated mass/volume, volume/volume, or mass/mass basis
- Calculate the stock volume required for a target solution
Try first
Get the idea
Reagent procedures state concentration in one of three ways, and each has its own calculation. Keep track of units at every step.
Molarity
Molarity is moles of solute per liter of finished solution. The mass to weigh out is:
mass (g) = mol/L × volume (L) × molar mass (g/mol)
The volume goes in as liters, so 250 mL is 0.250 L. Missing that step makes the answer a thousand times too large.1,2
Normality
Normality is equivalents per liter, and it depends on the reaction:
normality = molarity × n
Here n counts the protons, hydroxide ions, electrons or charges that take part in the stated reaction. The chemical formula is not enough to determine n.1
- Sulfuric acid gives up two protons when fully neutralized, so 1 mol/L is 2 N.
- Phosphoric acid has three protons. When only one reacts, n is 1 and the normality equals the molarity.
Percent solutions
Percent solutions come in three forms, and the label states which:3
| Form | Means | 5% example |
|---|---|---|
| w/v | grams of solute per 100 mL of solution | 5 g in each 100 mL |
| v/v | milliliters of solute per 100 mL of solution | 5 mL in each 100 mL |
| w/w | grams of solute per 100 g of solution | 5 g in each 100 g |
Converting a w/w percent to an amount per volume requires the solution's density. Concentrated acids are labeled this way, so their strength per milliliter is density × mass fraction. In these problems the specific gravity is used as the density in g/mL.3
Stock volume
A working solution is often made by diluting a concentrated stock. With both concentrations in the same unit:
C₁V₁ = C₂V₂, so V₁ = C₂V₂ ÷ C₁
- V₁ is the stock to measure.
- V₂ is the final volume of the whole solution.2 The stock is brought up to V₂ in total. Adding a full V₂ of water to the stock would overshoot the volume and leave the solution weaker than planned.
- With concentrated acid, add the acid slowly to water, with ventilation and protective equipment.4
Follow the bench demonstration
Sources for this step
References
- Bishop ML, Fody EP, Van Siclen C, Mistler JM, Moy M. Clinical Chemistry: Principles, Techniques, and Correlations. 9th ed. Jones & Bartlett Learning; 2023.
- Flowers P, Theopold K, Langley R, Robinson WR. Molarity. In: Chemistry 2e. OpenStax; 2019. Accessed September 23, 2026. https://openstax.org/books/chemistry-2e/pages/3-3-molarity
- Flowers P, Theopold K, Langley R, Robinson WR. Other units for solution concentrations. In: Chemistry 2e. OpenStax; 2019. Accessed September 23, 2026. https://openstax.org/books/chemistry-2e/pages/3-4-other-units-for-solution-concentrations
- National Institute for Occupational Safety and Health. Engineering Controls Database: acids and alkalis. Accessed September 23, 2026.
Watch one
You need 250.0 mL of 0.500 mol/L nitric acid.
- The stock is 70.0% w/w HNO₃ with a specific gravity of 1.42.
- The molar mass of HNO₃ is 63.01 g/mol.
How much stock do you measure, and how do you make up the solution?
- Find the HNO₃ per milliliter of stock: 1.42 g/mL × 0.700 = 0.994 g/mL, or 994 g/L.
A w/w percent is grams per 100 g, so density converts it to grams per volume.
- Convert to mol/L: 994 g/L ÷ 63.01 g/mol = 15.775 mol/L, kept unrounded.
C₁V₁ = C₂V₂ needs both concentrations in the same unit.
- Solve for V₁: (0.500 mol/L × 250.0 mL) ÷ 15.775 mol/L = 7.924 mL.
The stock volume supplies the moles the working solution needs.
- Round to 7.92 mL.
Round once, at the end, to the precision of the data.
- Add the 7.92 mL of acid slowly to about 200 mL of water in a 250 mL volumetric flask, then bring it to the 250.0 mL mark with water.
V₂ is the final volume of the whole solution, stock included.
Your turn
Review missed questions
For reference
Sources checked
The rest of this step has a short briefing, a demonstration at the bench and 3 practice problems.
Free account: keep your progress and get review reminders. Have one? Sign in